[. . . ] - The power cable must never be close to a heat source or resting on sharp edges. - If the power cable or the plug are damaged, do not use the appliance. [. . . ] - Turn the spindle (C) clockwise, holding the blade (D) by its upper section. Tip: you can use the "Auto-Pulse" button for better control over the chopping/mincing of certain ingredients such as onions or meat. Kneading/Mixing - When kneading, stop the appliance as soon as the dough starts to form a ball. (note: the lid of the liquidiser jug must be unlocked in order to be able to detach the handle (H4). ) The handle (B4) must be fitted to the bowl in order to be able to lock the liquidiser drive cover (A1). Press the release button (A4) to open the liquidiser drive cover (A1). - Slide the metal blade (D1) or the plastic kneading blade (D2) onto the spindle (C), down to the bottom of the bowl. Press the release button (A4) to open the liquidiser drive cover (A1). Press the release button (A4) to open the liquidiser drive cover (A1). Press the release button (A4) to open the liquidiser drive cover (A1). Press the release button (A4) to open the liquidiser drive cover (A1). If the lid is not fitted or incorrectly fitted on the jug, the appliance will not start. [. . . ] To remove the accessory from the appliance, press the release button (A4). When using the bowl assembly (B), that the liquidiser drive cover (A1) is locked. [. . . ]